|
Location: Norf Eest
Joined: Oct 2005
Posts: 14,995
|
|
Originally Posted by
nero
Especially for Random.
The locking cleats on the upper section I cut off had to be riveted back on but I did'nt have 8mm rivets.
I used an angle grinder to cut off the heads of the old ones, then drilled two 8mm holes in the side runners, put the old rivets in position through the holes then placed a steel washer over the stub.
Got the welder out and welded a blob on the rivet stub, while it was still red hot I placed a heavy butt hammer under the rivet head and whacked the red hot end with another hammer, that's more cash I've saved innit Kel.
The finished job.
Behind the mask I've got a big
on my face.
Hahahaaaa, Dennis you are a star, that has made my day.